金属掺杂纳米TiO2薄膜的制备和抗菌性能研究

采用sol—gel法在载玻片表面制备了Ce,Cu,i．a,Ag掺杂的锐铁矿相TiO2薄膜,并通过SEM,XRD．FT—IR及UVVIS进行了表征,比较了薄膜的抗菌性能．UV—VIS研究表明,金属掺杂纳米TiO2薄膜在近紫外区吸光度有明显提高。抗菌实验表明掺Ag的TiO2薄膜抗菌效果最佳。     

火焰原子吸收法测定土壤中金属锌吸光度高的原因

通过实验发现,由于在消解过程中使用玻璃管移取氢氟酸,导致了玻璃中的锌进入了样品中,给样品的分析带来了干扰,从而导致了分析的失败.     

北京北部水系沉积物中重金属的研究

主要研究了北京市北部水系沉积物中重金属(As、Hg、Cd、Cr、Cu、Mn、Ni、Pb、Ti和Zn)含量和来源.在潮白河及密云水库流域采集了17个沉积物样品,温榆河流域采集了5个样品,重金属含量As和Hg采用原子荧光光谱法测定,Cd、Cr、Cu、Mn、Ni、Pb、Ti和Zn含量用电感耦合等离子发射光谱法测定.研究结果表明,沉积物中重金属元素没有出现明显的富集状况,只有Hg、Cd、Cr和Zn在一些采样点有较高的富集.相关性分析表明Hg、Cd、Zn和Cu互相之间呈显著正相关(r0.06;p0.01),而Hg与Cr、Mn、Ni、Pb和Ti没有明显的相关性.通过主成分分析研究重金属的来源,发现前3个主成分贡献率分别为38%、23%和17%.因此,Hg、Cd、Zn和Cu作为第一主成分被认为与人类活动的工矿业开采有关,第二主成分As和Mn与人类活动的农业生产和生活污水排放有关,第三主成分Cr、Ni和Ti与岩石风化和土壤侵蚀有关.     

自然资源与环境安全研究进展

跟踪研究自然资源的演化、开发利用过程调控机理一直是中国科学院地理科学与资源研究所(以下简称我所)资源环境研究领域的重要研究任务和研究方向。论文总结了1950年以来我所自然资源与环境安全研究领域取得的成果与进展,在1950—1978年期间,我所自然资源与环境安全研究以大规模的自然资源调查与综合科学考察为主,丰硕的考察成果对中国的资源开发和区域发展提供了重要科学支持,做出了不可磨灭的贡献,而且在系统地积累科学资料和开拓资源科学方面也发挥了积极作用,它为了解我国资源环境、建立资源科学体系奠定了坚实的基础;1978—2000年期间,我所自然资源与环境安全研究转向了区域资源综合科学考察与资源科学研究并重的格局,完成的一系列考察报告为区域发展指明了路径,为全面认识中国自然资源和开展自然资源综合研究奠定了数据基础。2000年以来,我所自然资源与环境安全研究更加注重学科体系建设,促进了资源科学的学科体系建立;更加注重世界资源研究,将自然资源考察地域拓展到全球范围;更加注重机理过程研究,在资源环境承载力、资源流动、资源安全、生态服务功能等领域进行了理论开拓;更加注重资源开发利用技术研究,在环境修复的理论和技术方面取得了一系列成果。展望未来,我所资源与环境领域研究将会继续以国家重大战略需求为导向,以水资源、土地资源、生物资源、能源及矿产资源等关键资源为主要对象,在以下5个方面开展系统深入的研究,推动资源学科的建设与发展:①区域综合科学考察与资源科学综合研究;②水土资源可持续利用及其复杂性;③自然资源流动过程及其生态环境效应;④世界自然资源态势与国家战略性资源安全;⑤环境修复机理与废弃物资源化利用。     

我国资源经济与世界资源研究进展及展望

自然资源是人类赖以生存和发展的物质基础。资源短缺是我国社会经济发展的重要限制因素,未来这一矛盾将会更加突出。资源经济学是研究经济发展与资源开发、利用、保护、分配和管理之间关系的一门综合学科。加强资源经济与世界资源的研究,对实现我国可持续发展具有重要的战略意义。为适应国家发展的需求,我国在国内资源与资源科学领域研究已取得显著进展。同时,积极关注和研究世界资源问题,并取得了较大成就。这些研究为资源经济学发展提出新的需求,积累了丰厚的研究资料、实践经验、研究方法以及系统的理论准备,促进了资源经济的研究及学科不断成长与发展,并为国家发展做出重要贡献。论文着重分析资源经济学和世界资源的研究进展,对我国资源经济和世界资源研究进展及其成果进行总结和评析,对我国资源经济和世界资源研究发展趋势进行展望,提出新时期主要的研究方向和重点领域。     

Degradation and detoxification of microcystin-LR in drinking water by sequential use of UV and ozone

Microcystins (MCs) produced by cyanobacteria are strong hepatotoxins and classified as possible carcinogens.MCs pose a considerable threat to human health through tainted drinking and surface waters.Herein filtrated water from a waterworks in Harbin,China,was spiked with microcystin-LR (MC-LR) extracted from a toxic scum of microcystis aeruginosa,and the spiked sample waters were treated using UV irradiation with consequent ozonation process (UV/O3),compared with ozonation at a dose range commonly applied in water treatment plants,UV irradiation at 254 nm and UV irradiation combined with ozonation (UV+O3),respectively.The remaining of toxins were analyzed using high-performance liquid chromatography and also determined using a protein phosphatase type 2A inhibition assay,which was utilized to evaluate the reduction in toxicity.Results indicated that in comparison to other three processes (O3,UV,and UV+O3),UV/O 3 process could effectively decrease both the concentration and toxicity of MC-LR at 100 μg/L level after 5 min UV irradiation with consequent 5 min ozonation at 0.2 mg/L (below 1 μg/L),while 0.5 mg/L ozone dose was required for the level below 0.1 μg/L.The addition of an UV treatment step to the existing treatment train may induce significant transformation of micropollutants and breaks down the natural organic matters into moieties unfavorable for ozone decomposition,stabilizing the ozone residual.These findings suggested that sequential use of UV and ozone may be a suitable method for the removal of these potentially hazardous microcystins from drinking water.     

A comparative investigation of NdSrCu_(1-x) Co_x O_(4-δ) and Sm_(1.8) Ce_(0.2) Cu_(1-x) Co_x O_(4-δ) (x:0–0.4) for NO decomposition

A series of single-phase T-structured NdSrCu 1-x Co x O 4-δ with oxygen vacancies and T -structured Sm 1.8 Ce 0.2 Cu 1-x Co x O 4-δ (x: 0–0.4) with oxygen excess were prepared using ultrasound-assisted citric acid complexing method, and characterized by means of techniques such as thermogravimetric analysis and NO temperature-programmed desorption (NO-TPD). The catalytic activities of these materials were evaluated for the decomposition of NO. It was found that the NdSrCu 1-x Co x O 4-δ catalysts were of oxygen vacancies whereas the Sm 1.8 Ce 0.2 Cu 1-x Co x O 4-δ ones possessed excessive oxygen (i.e., over-stoichiometric oxygen); with a rise in Co doping level, the oxygen vacancy density of NdSrCu 1-x Co x O 4-δ decreased while the over-stoichiometric oxygen amount of Sm 1.8 Ce 0.2 Cu 1-x Co x O 4-δ increased. The NO-TPD results revealed that NO could be activated much easier over the oxygen-deficient perovskite-like oxides than over the oxygen-excessive perovskite-like oxides, with the NdSrCuO 3.702 catalyst showing the best efficiency in activating NO molecules. Under the conditions of 1.0% NO/helium, 2800 hr -1 , and 600–900°C, the catalytic activity of NO decomposition followed the order of NdSrCuO 3.702 NdSrCu 0.8 Co 0.2 O 3.736 NdSrCu 0.6 Co 0.4 O 3.789 Sm 1.8 Ce 0.2 Cu 0.6 Co 0.4 O 4.187 Sm 1.8 Ce 0.2 Cu 0.8 Co 0.2 O 4.104 Sm 1.8 Ce 0.2 CuO 4.045 , in concord with the sequence of decreasing oxygen vacancy or oxygen excess density. Based on the results, we concluded that the higher oxygen vacancy density and the stronger Cu 3+ /Cu 2+ redox ability of NdSrCu 1-x Co x O 4-δ account for the easier activation of NO and consequently improve the catalytic activity of NO decomposition over the catalysts.     

Iron-doped Mn-Ce/TiO2 catalyst for low temperature selective catalytic reduction of NO with NH3

The catalysts of iron-doped Mn-Ce/TiO 2(Fe-Mn-Ce/TiO 2) prepared by sol-gel method were investigated for low temperature selective catalytic reduction(SCR) of NO with NH 3.It was found that the NO conversion over Fe-Mn-Ce/TiO 2 was obviously improved after iron doping compared with that over Mn-Ce/TiO 2.Fe-Mn-Ce/TiO 2 with the molar ratio of Fe/Ti = 0.1 exhibited the highest activity.The results showed that 96.8% NO conversion was obtained over Fe(0.1)-Mn-Ce/TiO 2 at 180°C at a space velocity of 50,000 hr 1.Fe-Mn-Ce/TiO 2 exhibited much higher resistance to H 2 O and SO 2 than that of Mn-Ce/TiO 2.The properties of the catalysts were characterized using X-ray diffraction(XRD),N 2 adsorption,temperature programmed desorption(NH 3-TPD and NOx-TPD),and Xray photoelectron spectroscopy(XPS) techniques.BET,NH3-TPD and NOx-TPD results showed that the specific surface area and NH3 and NOx adsorption capacity of the catalysts increased with iron doping.It was known from XPS analysis that iron valence state on the surface of the catalysts were in Fe3+ state.The doping of iron enhanced the dispersion and oxidation state of Mn and Ce on the surface of the catalysts.The oxygen concentrations on the surface of the catalysts were found to increase after iron doping.Fe-Mn-Ce/TiO2 represented a promising catalyst for low temperature SCR of NO with NH3 in the presence of H2 O and SO2.     

Metal chlorides loaded on activated carbon to capture elemental mercury

Activated carbon (AC) was considered to be an effective sorbent to control mercury in combustion systems. However, its capture capacity was low and it required a high carbon-to-mercury mass ratio. AC loaded with catalyst showed a high elemental mercury (Hg0) capture capacity due to large surface area of AC and high oxidization ability of catalyst. In this study, several metal chlorides and metal oxides were used to promote the sorption capacity of AC. As a result, metal chlorides were better than metal oxides loaded on AC to remove gaseous mercury. X-ray diffractometer (XRD), thermogravimetric analyzer (TGA) and specific surface area by Brunauer- Emmett-Teller method (BET) analysis showed the main mechanisms: first, AC had an enormous surface area for loading enough MClx; second, Cl and MxOy were generated during pyrogenation of MClx; finally, there were lots of active elements such as Cl and MxOy which could react with elemental mercury and convert it to mercury oxide and mercury chloride. The HgO and HgCl2 might be released from AC’s porous structure by thermo regeneration. A catalytic chemisorption mechanism predominates the sorption process of elemental mercury. As Co and Mn were valence variable metal elements, their catalytic effect on Hg0 oxidization may accelerate both oxidation and halogenation of Hg0. The sorbents loaded with metal chlorides possessed a synergistic function of catalytic effect of valence variable metal and chlorine oxidation.     

溶解氧和光照对狐尾藻衰亡释放氮磷碳的影响

将杀青后的狐尾藻(Myriophyllum spicatum)切成0.5～1cm段浸泡于添加氯仿(抑制微生物活性)的装水烧杯中,置于人工气候箱(温度为5℃),考察光照和溶解氧对因植物组织溶解而导致的氮磷碳释放的影响。研究结果表明曝气组总氮释放量平均3.33mg/L,比不曝气组高6.39%。总磷释放量平均15.07mg/L,比不曝气组低50%以上。COD平均释放量66.83mg/L,为不曝气组2倍以上。(1)曝气抑制了硝氮释放。在搅拌作用下,植物残体和水溶液充分碰撞与接触,加速植物残体中氮和碳向水中转化,导致曝气组总氮、氨氮、有机氮和COD升高。曝气组植物残体破碎导致表面积增加对磷吸收的促进程度强于对附着作用的降低以及植物残体磷释放作用的增加,综合作用下导致水中磷浓度降低。曝气抑制了硝氮、总磷、溶解性总磷和溶解性无机磷释放。(2)有光照组总氮、总磷和COD平均浓度分别为3.13,30.53和32.51mg/L,分别为无光照组的1.24,3.28和2.46倍。光照促进狐尾藻总氮、氨氮、硝氮、总磷、溶解性总磷、溶解性无机磷及碳的释放,但抑制有机氮释放。